Colours

We do our best to produce accurate images but there may be some slight variation between how the colour appears on your screen and how it looks on the door. We always recommend ordering our free colour swatches or purchasing a sample door so you can see exactly what your door will look like in your chosen style and colour.

Door images

Please note that doors and drawer fronts are sold separately. Our images show doors with their corresponding drawer fronts, but this is for illustrative purposes only.

Cadence door specification

All Cadence doors have a hard-wearing vinyl surface and are manufactured from 18mm thick MDF.

Cadence products come with a 6 year manufacturer’s warranty as standard.

Cadence products have FSC certification, and the wood used is sourced from sustainable, well-managed forests. A selection of Cadence doors have been tested by FIRA and achieved the FIRA gold award.

Grain direction

Doors are supplied with vertical grain in all colours.

Drawer fronts up to 282mm high are supplied with horizontal grain in all colours.

Panels will be supplied with a vertical grain direction unless stated otherwise.

Horizontal grain can be provided on woodgrain colour options up to 1245mm high. Please let us know when ordering.

Door, drawer and panel sizes

The largest door we can manufacture is 2500mm high x 1000mm wide.

The minimum drawer height we can manufacture is between 100mm and 140mm, and the minimum width is between 100mm and 245mm, depending on style. Maximum width 1245mm.

The maximum panel width is 1245mm. The minimum panel height is 100mm, and the minimum panel width is 100mm.

Drawer front design

Drawer front design is supplied on all sizes up to 282mm high. The minimum height is between 100mm and 140mm, and the minimum width is 100mm.

Maximum width: 1245mm.

Midrails

Some door styles over 1730mm high will be supplied with a midrail that is double the frame width.

Doors with a midrail will be split 70/30, with a top and bottom panel.

Handles

Handles are not supplied as standard. Please choose a handle from our range, or fit your own.

Please note that some handles will not fit small drawer fronts.

Care should be taken before fitting to ensure your chosen handles are suitable for the size and style of the doors/drawers.

Due to the number of styles and sizes available, we’re unable to drill for handles.

Drilling for hinges

All doors are supplied undrilled, but we offer a hinge hole drilling service at a small charge.

Measure for hinge holes by measuring from the top or bottom of the door to the centre of the hinge hole.

If you need any help measuring for hinges, please give us a call.

Hinge holes can be drilled anywhere from 60mm from the top and bottom edges of the door.

Matching backs

“Matching back” means the door will have a similar coloured melamine back, rather than a vinyl back.

As such, the colour and texture may differ from the front of the door.

In particular, textured and high-gloss colour doors will be supplied with a matt, smooth finish back.

Most doors are supplied with matching finish backs, with the exception of Paintable Vinyl, which is supplied with a light grey back.

The backs of panels will match the backs of the doors.

High gloss colours

High-gloss finishes are manufactured using a heavier gauge of vinyl and, therefore, the definition can be less sharp on certain items with more detailed designs.

We strongly recommend ordering sample doors to see the true colours and overall effect.